- 复制 >
- Replication Reference >
- Read Preference Reference
Read Preference Reference¶
Read preference describes how MongoDB clients route read operations to members of a replica set.
By default, an application directs its read operations to the primary member in a replica set. Reading from the primary guarantees that read operations reflect the latest version of a document. However, by distributing some or all reads to secondary members of the replica set, you can improve read throughput or reduce latency for an application that does not require fully up-to-date data.
Read Preference Mode | Description |
---|---|
primary | Default mode. All operations read from the current replica set primary. |
primaryPreferred | In most situations, operations read from the primary but if it is unavailable, operations read from secondary members. |
secondary | All operations read from the secondary members of the replica set. |
secondaryPreferred | In most situations, operations read from secondary members but if no secondary members are available, operations read from the primary. |
nearest | Operations read from member of the replica set with the least network latency, irrespective of the member’s type. |
Read Preference Modes¶
- primary¶
All read operations use only the current replica set primary. This is the default. If the primary is unavailable, read operations produce an error or throw an exception.
The primary read preference mode is not compatible with read preference modes that use tag sets. If you specify a tag set with primary, the driver will produce an error.
- primaryPreferred¶
In most situations, operations read from the primary member of the set. However, if the primary is unavailable, as is the case during failover situations, operations read from secondary members.
When the read preference includes a tag set, the client reads first from the primary, if available, and then from secondaries that match the specified tags. If no secondaries have matching tags, the read operation produces an error.
Since the application may receive data from a secondary, read operations using the primaryPreferred mode may return stale data in some situations.
- secondary¶
Operations read only from the secondary members of the set. If no secondaries are available, then this read operation produces an error or exception.
Most sets have at least one secondary, but there are situations where there may be no available secondary. For example, a set with a primary, a secondary, and an arbiter may not have any secondaries if a member is in recovering state or unavailable.
When the read preference includes a tag set, the client attempts to find secondary members that match the specified tag set and directs reads to a random secondary from among the nearest group. If no secondaries have matching tags, the read operation produces an error. [1]
Read operations using the secondary mode may return stale data.
- secondaryPreferred¶
In most situations, operations read from secondary members, but in situations where the set consists of a single primary (and no other members), the read operation will use the set’s primary.
When the read preference includes a tag set, the client attempts to find a secondary member that matches the specified tag set and directs reads to a random secondary from among the nearest group. If no secondaries have matching tags, the client ignores tags and reads from the primary.
Read operations using the secondaryPreferred mode may return stale data.
- nearest¶
The driver reads from the nearest member of the set according to the member selection process. Reads in the nearest mode do not consider the member’s type. Reads in nearest mode may read from both primaries and secondaries.
Set this mode to minimize the effect of network latency on read operations without preference for current or stale data.
If you specify a tag set, the client attempts to find a replica set member that matches the specified tag set and directs reads to an arbitrary member from among the nearest group.
Read operations using the nearest mode may return stale data.
注解
All operations read from a member of the nearest group of the replica set that matches the specified read preference mode. The nearest mode prefers low latency reads over a member’s primary or secondary status.
For nearest, the client assembles a list of acceptable hosts based on tag set and then narrows that list to the host with the shortest ping time and all other members of the set that are within the “local threshold,” or acceptable latency. See 节点的选择 for more information.
[1] | If your set has more than one secondary, and you use the secondary read preference mode, consider the following effect. If you have a three member replica set with a primary and two secondaries, and if one secondary becomes unavailable, all secondary queries must target the remaining secondary. This will double the load on this secondary. Plan and provide capacity to support this as needed. |
Use Cases¶
Depending on the requirements of an application, you can configure different applications to use different read preferences, or use different read preferences for different queries in the same application. Consider the following applications for different read preference strategies.
Maximize Consistency¶
To avoid stale reads under all circumstances, use primary. This prevents all queries when the set has no primary, which happens during elections, or when a majority of the replica set is not accessible.
Maximize Availability¶
To permit read operations when possible, Use primaryPreferred. When there’s a primary you will get consistent reads, but if there is no primary you can still query secondaries.
Minimize Latency¶
To always read from a low-latency node, use nearest. The driver or mongos will read from the nearest member and those no more than 15 milliseconds [2] further away than the nearest member.
nearest does not guarantee consistency. If the nearest member to your application server is a secondary with some replication lag, queries could return stale data. nearest only reflects network distance and does not reflect I/O or CPU load.
[2] | This threshold is configurable. See localPingThresholdMs for mongos or your driver documentation for the appropriate setting. |
Query From Geographically Distributed Members¶
If the members of a replica set are geographically distributed, you can create replica tags based that reflect the location of the instance and then configure your application to query the members nearby.
For example, if members in “east” and “west” data centers are tagged {'dc': 'east'} and {'dc': 'west'}, your application servers in the east data center can read from nearby members with the following read preference:
db.collection.find().readPref( { mode: 'nearest',
tags: [ {'dc': 'east'} ] } )
Although nearest already favors members with low network latency, including the tag makes the choice more predictable.
Reduce load on the primary¶
To shift read load from the primary, use mode secondary. Although secondaryPreferred is tempting for this use case, it carries some risk: if all secondaries are unavailable and your set has enough arbiters to prevent the primary from stepping down, then the primary will receive all traffic from clients. If the primary is unable to handle this load, queries will compete with writes. For this reason, use secondary to distribute read load to replica sets, not secondaryPreferred.
Read Preferences for Database Commands¶
Because some database commands read and return data from the database, all of the official drivers support full read preference mode semantics for the following commands:
- group
- mapReduce [3]
- aggregate [4]
- collStats
- dbStats
- count
- distinct
- geoNear
- geoSearch
- geoWalk
- parallelCollectionScan
2.4 新版功能: mongos adds support for routing commands to shards using read preferences. Previously mongos sent all commands to shards’ primaries.
[3] | Only “inline” mapReduce operations that do not write data support read preference, otherwise these operations must run on the primary members. |
[4] | Using the $out pipeline operator forces the aggregation pipeline to run on the primary. |